Tungsten Carbide Punch Dies Manufacturer
- Well abrasion Resistance.
- High Hardness, around 88HRA or even 91HRA.
- A high compressive strength is greater than 6000MPa.
- Excellent corrosion Resistance.
- High precision and high quality, the service life is over 10 times longer than common high-speed steel.
- A low coefficient of thermal expansion
Factory Advantages
1. More than 20 years of Experience
2. Adopting advanced production technology with high-precision machines
3. Strict QC management system with advanced inspecton equipment
4. Special-designed packing boxes and tubes
5. Various shipping methods for choosing
6. Best after-sale services
More Detail Information About Tungsten Carbide Punching Dies
The carbide dies have excellent concentricity, parallelism, perpendicularity, The carbide punch manufactured by XYMJ has excellent performance, outside diameter, inner diameter, the height of which, are all accurate grinding, tolerance within 0.01mm, mainly used for piercing by machinery manufacture & hardware, the finished holes are free of burrs and own precise size.
Customized products can be supplied according to specific details. Complete interchangeability of our carbide dies components is guaranteed.
Factors To Consider For Designing Carbide Dies
1. It must have a high yield, good structural shape with high dimensional accuracy.
2. If necessary, all the bottom and upper of the carbide dies should use tungsten carbide through the analysis of the most worn parts. In some cases, you can adopt tool steel and tungsten carbide in combination under the situation that has punch difficulty processing or fixed in order that the mould manufacturing and application must be the most reasonable and economical.
3.Under the allowed processing conditions of tungsten carbide die, the mosaic structure is more economical, easy to process and repair.
Grade List
|
Chinese Grade |
Equal to ISO Category Number | Chemical Composition | Physical Mechanical Properties | |||
| WC | Co | Density | Bend Strength | Hardness | ||
| % | % | G/Cm3 | N/mm2 | HRA | ||
| YG3 | K01 | 96.5-97 | 3 | 14.9-15.3 | ≥1180 | ≥91.0 |
| YG6X | K10 | 93.5 | 6 | 14.8-15.1 | ≥1420 | ≥92 |
| YG6 | K20 | 94 | 6 | 14.7-15.1 | ≥1600 | ≥91 |
| YG8 | K20-K30 | 92 | 8 | 14.5-14.9 | ≥1600 | ≥90 |
| YG10 | K40 | 90 | 10 | 14.3-14.7 | ≥1900 | ≥89 |
| YG10X | K40 | 89 | 10 | 14.3-14.7 | ≥2200 | ≥89.5 |
| YG15 | K30 | 85 | 15 | 13.9-14.2 | ≥2100 | ≥87 |
| YG20 | K30 | 80 | 20 | 13.4-13.7 | ≥2500 | ≥85.5 |
| YG20C | K40 | 80 | 20 | 13.4-13.7 | ≥2200 | ≥85.5 |
| YG30 | G60 | 70 | 30 | 12.8 | ≥2750 | ≥82 |
